Smaller Implant construct, better biomechanical strength and easy access instruments – This helps to achieve a fast and efficient surgical procedure with optimal patient outcomes.
An enhanced set of instruments and implants meant for posterior cervical fixation (Lateral mass/cervical pedicle/C1-C2).
The Implants provide the flexibility required to accommodate the variations in patient anatomy and type of procedure.
Flexibility Marking on Implant – The Implants provide the flexibility required to accommodate the variations in patient anatomy and type of procedure.
Dual Diameter Rod/ Tapering Rod – It accommodates two different types of diameter for accommodating screws according to anatomy of spine.
Cervical Plates – Available in two different sizes (Large & Medium).
T shaped cervical plates – For perfectly matching the anatomy of patient.
Different placement location – Five different placement location of occipital screws.
Occipital Fixation – 3.5 mm rod connects the screw in the cervical spine with the plate in the occiput to achieve a stable occipital- cervical fixation.
Open parallel connectors or tapered rods – Can be used to connect the 3.5mm rod with any 5.5 mm rod thus extend the construct to the thoracic spine.
Flexibility Marking on Implant – The Implants provide the flexibility required to accommodate the variations in patient anatomy and type of procedure.
Rods & Cervical Plates
Dual Diameter Rod/ Tapering Rod – It accommodates two different types of diameter for accommodating screws according to anatomy of spine.
Cervical Plates – Available in two different sizes (Large & Medium).
T shaped cervical plates – For perfectly matching the anatomy of patient.
Different placement location – Five different placement location of occipital screws.
Occipital Fixation – 3.5 mm rod connects the screw in the cervical spine with the plate in the occiput to achieve a stable occipital- cervical fixation.
Open parallel connectors or tapered rods – Can be used to connect the 3.5mm rod with any 5.5 mm rod thus extend the construct to the thoracic spine.
Screws
Poly- axial screws with up to 40° angulations in all directions.
Low-Profile tulip – Self-tapping Screws- For easy and rapid insertion.
Available in 3.5mm & 4mm dia.
Length available in 10mm to 32 mm.
Locking cap has reverse buttress thread.
Dual option for 2-point reduction – It has two different option for reduction. one at the top-notch grove of tulip and other at the mid of tulip.
Chances of slippage during reduction is less due to the presence of reduction point at various location in tulip.